CONAP® UC-23

CONAP® UC-23 is a two-component modified urethane system that produces a tough, highly impact resistant elastoplastic. This liquid urethane casting system has excellent handling characteristics and will cure at room or elevated temperatures

UC-23

UC-23

CONATHANE® UC-40

CONATHANE® UC-40 is a liquid, two-component, unfilled urethane resin system that produces tough, high-impact resistant, dimensionally stable castings. UC-40 is used to produce prototype parts requiring a "thermoplastic" feel and appearance. The use of UC-40 as a prototyping material will cut costs by reducing the high expense of tooling normally required for a thermoplastic. It is economical to produce prototype parts and limited production runs out of UC-40.ts

UC-40

UC-40

CONATHANE® UC-41

CONATHANE® UC-41 is a two-component, unfilled urethane resin system that produces tough, impact resistant, dimensionally stable castings. UC-41 is used to produce prototype parts requiring a "thermoplastic" feel and appearance. The use of UC-41 as a prototyping material reduces the expense of tooling normally required for a thermoplastic. Prototype parts and limited production runs can be done economically by using UC-41.

UC-41

UC-41

CONATHANE® UC-43

CONATHANE® UC-43 is a liquid, two-component, unfilled polyurethane resin system that produces tough, high-impact resistant, dimensionally stable castings. UC-43 exhibits the unique ability to retain its hardness at elevated temperatures. This system may be used to produce prototype parts requiring a "thermoplastic" feel and appearance. The use of UC-43 as a prototyping material will cut costs by reducing the high expense of tooling normally required for a thermoplastic

CE-1170

CE-1170

CONATHANE® UC-48

CONATHANE® UC-48 is a liquid, two-component, unfilled polyurethane resin that produces tough, high-impact resistant, dimensionally stable castings. UC-48 is used to produce prototype parts requiring a "thermoplastic" feel and appearance.

CE-1171

CE-1171

CONATHANE® UC-49

CE-1175

CE-1175

CONATHANE® UC-51

CONATHANE® UC-51 produces tough polyurethane castings with good flexural modulus, good impact resistance, and the feel of reinforced polypropylene or an engineering thermoplastic. The system is designed for quick mold turnover in either silicone or polyurethane tooling. The one-to-one volumetric mix ratio is designed for easy and efficient dispensing from either two-barreled cartridges or automated meter mix equipment. The low initial viscosity allows easy injection into complex molds.

UC-51

UC-51

CONATHANE® UC-54

CONATHANE® UC-54 is a two-component, low viscosity, 85 Shore D urethane casting system exhibiting excellent hardness retention at elevated temperatures. Low exotherm permits casting of large parts.

UC-54

UC-54